Skip to content

About Invar Machining

One narrow alloy family, one quote, partner shops that cut the parts and an engineer who follows every order.

What this site is

Invar Machining supplies parts cut from Invar 36, Super Invar, Kovar and Alloy 42. We read your RFQ, send you one itemised quote for the finished parts and place the work with a partner shop that has actually cut those alloys before, suited to your alloy, tolerance and heat treatment requirement. An engineer follows the run, you get a progress update every week and we inspect the parts before packing. You deal with one contact, place one purchase order and receive one invoice.

Why one narrow alloy family

Low-expansion alloys are a small, specific niche inside CNC machining. The buyers who need them, optical and photonics engineers, composite tooling designers, metrology and semiconductor equipment builders, aerospace program managers, are searching for something more specific than "CNC machining." A general job-shop directory does not surface which shops actually run a stress relief furnace or measure at a controlled temperature. Staying focused on this one alloy family is what lets us ask the right qualifying questions before a shop ever sees your drawing.

How an order runs

You send a drawing and the details covered in what to include on an Invar RFQ: alloy and spec, heat treatment requirement, critical tolerances, and any certification or environmental requirements. We review it, and if something is missing we ask before we quote anything. We then ask the partner shops whose alloy experience, heat treatment access and part size fit your request to price it, up to 3 for one part, and send you one itemised quote for the finished parts. There is no separate service fee. Payment terms, remake policy and Incoterm are confirmed on your quote.

On the shop side, we ask the questions covered in how we check partner shops before a shop receives any work request: which low-expansion alloys they have actually machined recently, where stress relief happens, how they fixture thin sections, and where and at what temperature they measure. A shop that cannot answer these specifically does not receive work on a thermally critical part.

Editorial standards for our guides

The guides on this site are written to be useful to someone about to write an RFQ, not to sell a specific shop. A few rules we hold ourselves to:

  • Typical values, labeled as typical. CTE figures, tolerances and cost ranges are handbook-style values for planning, not a promise for your specific heat lot or part. A shop's own quote and, where relevant, measured data for your material is what you should rely on for a real commitment.
  • No invented case studies or client counts. We do not publish fabricated project examples, customer counts or testimonials. Where a guide gives a worked example, it is described as an example, not a real past order.
  • No unverified certifications. We do not claim ISO, AS9100 or any other certification for this site or for shops in general. Certifications shown in a supplier's own profile are the shop's claim, not ours.
  • Standards cited by name. Where a guide references a specification, ASTM F1684 for Invar 36 or ASTM F15 for Kovar for example, that is the standard named on drawings and certificates, not a paraphrase. ASTM withdrew F1684, F15 and F30 in 2024, and a guide says so where it cites them.

Contact

Buyers: . Shops interested in joining the network: . We reply within 24 business hours.

Get a quote